For Damp Proofing course like Footing, Masonry Wall, Neck Columns, and Plinth Beam & DPC. Resist Salt Attacks.

• Areas of Application: Damp Proofing for the below ground concrete structures (Footing, Masonry Wall, Neck Columns and Plinth Beam & DPC).
• Resists the attack of salts like chlorides and sulphates that are present in the soil. The application temperature should be between 5°C to 55°C.
• Stir the contents of the drum thoroughly prior to application to remove any sediment. The application can be done with a roller, brush or airless spray. Apply the coating at a coverage rate of 4 sqm/lt/coat, depending on the dry film thickness required. 2nd coat to be applied in a direction perpendicular to the 1st coat.
• Water-based. Non-flammable. Versatile and Economical. The application can be done with a roller, brush, or air spray.
• Coverage: When applied at 4m2/ Ltr/ coat, the dry film thickness achieved will be 125 microns. Further coats shall be applied only after the previous coat dries off completely. Adheres to concrete. Can be applied in closed or confined spaces.